{short description of image}      Beamer & Associates, Inc.
   
Home About Us Services Equipment Tank Farms Blending Pigging Plant Operations Clients Contact Us
 


Total Control Systems TCS 700 Rotary Flow Meter


TCS700 Meter Installed

Return to top 
DESIGN

The TCS Model 700 Series Flow Meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal to metal contact inside the chamber, eliminates any deterioration in accuracy and provides a longer service life.

The rotors are supported within bearing sleeves on two bearing plates where at the end of each rotor shaft is a timing gear. The blocking rotor gear has twice the number of teeth as the displacement rotor gears and operates at half the RPM as the displacement rotors. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which will then give a consistent and superior measurement of accuracy.

 TCS 700 Rotors
Return to top 
FEATURES
  • Excellent Linear Accuracy
  • Superior Repeatability at Constant Flow
  • Low pressure drop
  • Low maintenance
  • Long service life
  • Advanced material of construction
  • Compact size and light weight design
  • Wide range of flow: up to 600 GPM (2,271 LPM)
  • Wide viscosity range: up to 1,500,000 SSU (325,000 centipoise)
  • Meets NIST, USA military specifications and other international weights & measures accuracy requirements.
 

Return to top 
ACCURACY

The 700 Rotary Flow Meter holds the National Type Evaluation Program (NTEP) Certificate of Conformance meeting the National Institute of Standards and Technology (NIST) Handbook 44 requirements for the resale of petroleum products. The 700 Rotary Flow Meter combines outstanding accuracy with superior performance. Due to the smooth flowing characteristics of this meter design, the minimum seal area provides a sustained accuracy over a wide range of flow, regardless of pressure fluctuations.
  • Linear accuracy of maximum nominal capacity:
  5:1 = ± 0.1%
10:1 = ± 0.125%
15:1 = ± 0.15%
  • Excellent repeatability at constant flow: 0.05% over the entire flow range.
  • Meets NIST, USA military specifications and other international weights & measures accuracy requirements
NOTE: Accuracy is obtainable when operating conditions are constant. This information is based on 700SP/SPA meters and Veeder Root mechanical registration, using 1 cPs testing fluid. Linear accuracy can improve using electronic registration.
Return to top 
METER TYPES

SP - Standard Petroleum For metering refined petroleum products such as Leaded and Unleaded Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Aviation Gasoline, Jet Fuels, Vegetable Oils, Motor Oils, Ethylene Glycol (Anti-Freeze), etc.

SP - Standard Petroleum
(Premium Grade)
For metering refined petroleum products such as Aviation Gasoline, Jet Fuels, Leaded and Unleaded Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, etcs.

IP - Industrial Products For metering Food Processing Liquids, Industrial Chemicals, General Solvents and many other liquids; such as Liquid Sugars, Corn Syrup, Soy Bean Oil, Shortenings, Latex Products, Adhesives, etc.

IC - Industrial Products
(Carbon Bearings)
For metering Industrial Chemicals, General Solvents,, Water and other NON-LUBRICATING LIQUIDS; such as Alcohol, Acetones, Ethanol, Naphtha, Xylene, MEK, Toluene, Deionized Water, Demineralized Water, Potable Water, etc.

AF - All Ferrous For metering Pesticides, Nitrogen Solutions, Fertilizer, Chlorinated Solvents and other NON-LUBRICATING AND MILD ABRASIVE LIQUIDS; such as Asphalt Emulsion, Paint, Ink, Alcohols, Adhesives, Motor Oils, Molasses, Corn Syrup, Liquid Sugars, Deicing Fluids, etc.

SS - Stainless Steel For metering all the same liquids as the SP, SPA, IP, IC and AF flow meters, but includes special handling fluids such as Nitric, Phosphorus and Glacial Acetic Acids, Anti-Icing Fluids, Vinegar, Fruit Juices, etc.


Return to top 

METER CONSTRUCTION

Description SP SPA IP IC AF SS
Housing Anodized Aluminum Anodized Aluminum Hardcoat Anodized Aluminum Hardcoat Anodized Aluminum Cast Iron Stainless Steel
Rotors Anodized Aluminum Anodized Aluminum Hardcoat Anodized Aluminum Hardcoat Anodized Aluminum Stainless Steel Stainless Steel
Bearing Plates Ni-Resist Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Bearings Sleeves Ni-Resist Carbon Graphite Non-Galling SS Alloy Carbon Graphite Ceramic Ceramic
Gears Sintered SS Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Journals Plated SS Plated SS Plated SS Plated SS Plated SS Plated SS
Seals Viton® Viton® Teflon® &
Simriz®
Teflon® & Simriz® Teflon® & Simriz® Teflon® & Simriz®

Return to top 
CAPACITY

 
Meter Types Available Flange Connection* Max. Capacity
GPM (LPM)**
Working Pressure Working Temperature***
700-15 SP, SPA, IP & IC 1½" NPT Flange;
2" Optional
60 GPM
(227 LPM)
150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
700-20 SP, SPA, IP, IC, AF & SS 2" NPT Flange;
1½" Optional
100 GPM
(380 LPM)
150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
700-25 SPA 2" NPT Flange 150 GPM
(567 LPM)
150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
700-30 SP, SPA, IP & IC 3" NPT Flange;
2" Optional
200 GPM
(760 LPM)
150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
700-35 SPA 3" NPT Flange 300 GPM
(1135 LPM)
150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
700-40 SP, SPA, IP & IC 4" NPT Flange;
3" Optional
500 GPM
(1,893 LPM)
150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
700-45 + SPA 4" NPT Flange 600 GPM (2271 LPM) 150 PSI
(10.5 BAR)
-40°F to 160°F
(-40°C to 71°C)
 
+ NIST Weights & Measures are pending for the 700-45 SPA flow meter.
* Flanged NPT is standard; BSPT, Slip Weld, ANSI and other flanges are available upon request.
** Unit of Measure is standard in U.S. Gallons; Litrers, Pounds, etc. available upon request.
*** Higher working temperatures can be achieved at reduced pressure (Consult factory for more information) .


Return to top 
ACCESSORY OPTIONS

ELECTRONIC REGISTERS:  Veeder Root, F-RAMS, TouchStar, MidCom, etc.

REGISTER: Veeder Root 5 wheel resetable with totalizer.

PRESET:  Veeder Root 5-digit.

TICKET PRINTER:  Veeder Root Zero Start (Standard).

SHUT-OFF VALVE:  Appropriate internals, gaskets and seals to each model. Note: 2-stage valve closure, normally closed.

AIR ELIMINATOR & STRAINER:  Available in all sizes with the appropriate internals, gaskets, and seals to each model.

HIGH VOLUME STRAINER: Available in 2" only.

CUTOFF SWITCH:  Available with 2 stage Veeder Root Preset Register.

TEMPERATURE COMPENSATOR:  Available with electronic register ONLY.

TRANSMITTER OUTPUT:  1, 10 or 100 pulses per revolution of output shaft.

AIR CHECK VALVE: Available in 2" and 3" sizes, with appropriate internals, gaskets and seals.

WAFER CHECK VALVE: Available in all sizes, with Zinc Plated Steel ONLY.

REGISTER EXTENSIONS: Available in standard and custom lengths. Heated trim also available.



   
  Home ¦ About Us ¦ Services ¦ Equipment ¦ Tank Farms ¦ Blending ¦ Pigging ¦ Plant Operations ¦ Clients ¦Contact Us
  This website is the sole property of Beamer & Associates, Inc.
Duplication of any part can only be made after having received the express permission by Beamer & Associates, Inc. and/or its officers.